Skip to resume
Amarat, LLCConcorde LLC
← All team members

CONCORD LLC TEAM / CONCORDE LLC

Nandu Balachandran, PE

Electrical and Physical Design Lead

Discuss a project →

Professional Profile

Licensed Professional Engineer with an extensive background in design engineering and leading design teams in substation engineering. Through direct responsibility and guidance within these teams, Balachandran has issued many substation design packages, including the physical and protection and control (P&C) components, and has coordinated other disciplines such as civil and environmental. Balachandran’s expertise also covers the design and management of complete battery energy storage system (BESS) packages: interconnection substation design, battery yard layouts, and protection and control systems for grid integration.

Experience covers project design, quality checking, team management and support in all phases of a project and in all major voltage classes up to 500 kV, with utilities including Entergy, Pacific Gas & Electric, Avangrid, Ameren, LUMA and municipal utilities. It also includes the evaluation and upgrade of industrial power systems; setting up, configuring and testing equipment; test plans for utility devices; and modeling and simulation of utility power systems with real-time simulators. Master’s thesis research covered optimization of electric power systems with optimal power flow and distributed energy resources in a transactive energy framework.

Selected Experience

Ameren Transmission and Distribution projects (IL and MO)

Managed a team of more than 30 engineers and drafters as Director of Engineering, completing substation design projects for Ameren Transmission and Distribution, and worked on substation design projects from 500 kV to 12 kV. Tasks included project scoping, preliminary site evaluation and field analysis, proposal and bid preparation, and overall responsibility for engineering design in compliance with client standards and specifications. Coordinated inter-office design teams, schedules and budgets. Led project kickoff, design reviews, preparation of issued-for-construction (IFC) and as-built drawings, construction support and responses to field questions.

Pacific Gas & Electric projects (CA)

Led a team of engineers and designers creating engineering and construction packages for substation design projects. Quality checked P&C packages: relay AC/DC schematics, single-line, three-line and wiring diagrams, SCADA circuits, station service, ATS, RTU, circuits and cabling, conduit fill, BOM, voltage drop calculations, general arrangement, panel layout and control house. Integrated third-party stations with utility substations, cogeneration protection, and customer stations on three-terminal lines and tap loads. Selected vendors for equipment and material orders.

Avangrid: RG&E and NYSEG (NY)

Led a multidisciplinary team (electrical, physical, civil and environmental) in the design of complete construction packages across substation voltage levels, and oversaw quality assurance of P&C and physical drawings: relay single-line diagrams, DC schematics, three-line and wiring diagrams, general arrangement, equipment assembly, section views and profiles, RTU drawings, circuits and cabling, conduit fill, BOM, voltage drop calculations, panel layout and control house layouts. Led conceptual and detailed design packages for both air-insulated (AIS) and gas-insulated (GIS) substations, meeting utility requirements such as CLCPA, NERC compliance and pilot wire upgrades.

Entergy (LA, MS, AR, TX)

Completed substation design projects from 12 kV up to 500 kV: breaker replacements, line upgrades, power and autotransformer replacements and upgrades, bus differentials, DTT, feeder breakers, RTU, SCADA, DFR and telecom panels. Prepared test plans for digital fault recorders following NERC, FERC, IEEE and utility requirements; performed acceptance testing of a TESLA 4000 DFR and PMU; wired and tested protection relays, DFRs and PMUs with hardware-in-loop simulation; supported installation, commissioning and testing of static VAR compensators; and performed real-time modeling, load flow, short-circuit and transient studies.

LUMA (PR)

  • BESS. Designed and managed complete BESS design packages, including the interconnection substation, for multiple sites in Puerto Rico: 100 MWh battery yard, GIS switchgear control enclosure and walk-in metal-clad switchgear, BESS circuits, battery augmentation design, 38/13.2 kV transformer and high-side gas breaker, auxiliary power, and the line tap with a recloser for a sectionalizing scheme during faults.
  • 115 kV transmission center rebuild and GIS substation relocation. Managed the design and construction of a 115/38 kV transmission center switchyard in a breaker-and-a-half configuration with two 112 MVA transformers; a 38 kV double-bus GIS upgrade with bus coupler; a new 13.2 kV GIS single-bus system with a 38/13.2-4.16 kV transformer; protection, automation and control to IEC 61850; and SCADA and telecommunications upgrades with fiber and microwave links.
  • Engineering studies. Load flow, short circuit, protection coordination, arc flash, lightning, lighting and grounding analyses.

Citrius Flatts: protection coordination and arc flash study

Protection coordination and arc flash study in SKM for the medium-voltage and auxiliary portion of a 100 MW BESS project connected to the point of interconnection through one 70/94/117 MVA, 138-34.5 kV main transformer and five 34.5 kV feeder circuits. Covered breaker settings, TCC curves, incident energy and arc flash boundaries, settings optimized to reduce incident energy, verification of fuse ratings, MCB sizing and cable sizing for the AC panels, and arc flash labels with recommended PPE.

Qualifications as supplied November 1, 2026. Experience includes work with prior employers. Project roles, availability and current professional registrations are confirmed for each engagement.